|
 Introduction
For EEG applications and more, the innovative OneStep EEG-Gel®
combines the typical two step approach of skin preparation and conductivity
gel application into a single step. Besides the convenience of a
one step process, the optimal conductivity to the electrodes is
achieved using the OneStep EEG-Gel®.
Background
Due to the skin's natural fat content and corneous layer, a good
contact between scalp and the electrodes is often not achieved even
with the use of conductive gels. The consequence is incorrect or
non-analyzable results. In fact lack of electrode contact is the
most frequent malfunction source within EEG measurements. To minimize
this source of error, the scalp should be prepared before application
of the electrodes by cleansing and exfoliating the skin.
Why
use OneStep EEG-Gel®?
Up to now preparing the skin for optimal electrode contact required
a two step process. First step involves cleansing and roughening
the skin followed by the application of electrolyte solution to
ensure a good contact between electrodes and skin. By the use of
OneStep EEG-Gel® this time-consuming preparation of the skin
for examinations is eliminated. How? OneStep EEG-Gel® contains
both the abrasives (ie pumice) to roughen / cleanse the skin and
the electrolytes for good conductivity. The end result is skin preparation
and optimum conductivity achieved by the use of only one gel and
only one procedure. This saves time for both the user and the patient,
and improves the overall efficiency of the procedure.
Features
Because OneStep EEG-Gel® contains neither fat nor alcohol or
colourings it is easy to remove by rinsing and friendly to skin.
Additional it has a neutral odour for greater acceptance by users
and patients. In contrast to alcohol-containing or liquid EEG preparations,
a good constant conductivity is achieved. Because it is a viscous
gel, OneStep EEG-Gel® can be selectively applied to any skin
surface and still provide optimal results. This includes testing
done at very low measurement resistance (ie from 2-5 kW) proven
in numerous applications.
Due to these excellent physical properties, OneStep EEG Gel®
is applicable for routine EEGs, long time EEGs, evoked potentials
and nerve stimulations.
Application
Please shake well before using! For routine EEG applications, squeeze
5-6 grams of the gel onto a suitable pad. Then apply OneStep EEG-Gel®
with the help of a cotton bud where the electrodes will be placed
and use slight pressure in a circular motion to scrub the area.
OneStep EEG-Gel® is a ready to use gel which is applied directly
on the scalp. When the EEG is complete, the electrode felts can
be easily rinsed with water until clean. Gel that remains in the
patient's hair can be removed with water or by combing the hair
after drying.
Package
size and prices
OneStep EEG-Gel® is produced according to pharmaceutical GMP
conditions. It is available in packaging sizes of 120 g. The costs
for one package is 7,90 € which corresponds to 0,29 Eurocent
per routine EEG. OneStep EEG Gel® has a shelf life of 36 months.
Questions?
Please contact us at the following location:
H + H Medical Devices tel.: +49 (0)2590-913893
Mr. Andreas Hellwig fax: +49 (0)2590-913843
Lütke Feld 9 e-mail: info@onestep-eeg-gel.com
D-48249 Dülmen web: www.onestep-eeg-gel.com
Introduction
For EEG applications and more, the innovative OneStep AbrasivPlus®
combines the typical two step approach of skin preparation and conductivity
gel application into a single step. Besides the convenience of a
one step process, the optimal conductivity to the electrodes is
achieved using the OneStep AbrasivPlus®.
Background
Due to the skin's natural fat content and corneous layer, a good
contact between skin and the electrodes is often not achieved even
with the use of conductive gels. The consequence is incorrect or
non-analyzable results. In fact lack of electrode contact is the
most frequent malfunction source within measurements. To minimize
this source of error, the skin should be prepared before application
of the electrodes by cleansing and exfoliating the skin. Due to
the experiences in the practice OneStep AbrasivPlus® is a consequent
advancement of our OneStep EEG-Gel®. It offers a stronger abrasive
effect and it is more viscous. Therefore OneStep AbrasivPlus®
shows excellent results for the use in ECG and long-term examinations
too, even if the corneous layer is thicker or the patient suffer
in intensive perspiration.
Why
use OneStep®?
Up to now preparing the skin for optimal electrode contact required
a two step process. First step involves cleansing and roughening
the skin followed by the application of electrolyte solution to
ensure a good contact between electrodes and skin. By the use of
OneStep AbrasivPlus® this time-consuming preparation of the
skin for examinations is eliminated. How? OneStep AbrasivPlus®
contains both the abrasives (ie pumice) to roughen / cleanse the
skin and the electrolytes for good conductivity. The end result
is skin preparation and optimum conductivity achieved by the use
of only one gel and only one procedure. This saves time for both
the user and the patient, and improves the overall efficiency of
the procedure.
Features
Because OneStep AbrasivPlus® contains neither fat nor alcohol
or colourings it is easy to remove by rinsing and friendly to skin.
Additional it has a neutral odour for greater acceptance by users
and patients. In contrast to alcohol-containing or liquid preparations,
a good constant conductivity is achieved. Because it is a viscous
gel, OneStep AbrasivPlus® can be selectively applied to any
skin surface and still provide optimal results. This includes testing
done at very low measurement resistance (ie from 2-5 kW) proven
in numerous applications.
Due to these excellent physical properties, OneStep AbrasivPlus®
is applicable for routine EEGs, ECGs, long time EEGs and ECGs, evoked
potentials and nerve stimulations.
Application
Please shake well before using! For each application, squeeze 5-6
grams of the gel onto a suitable pad. Then apply OneStep AbrasivPlus®
with the help of a cotton bud where the electrodes will be placed
and use slight pressure in a circular motion to scrub the area.
OneStep AbrasivPlus ® is a ready to use gel which is applied
directly on the skin. When the examination is complete, the electrode
felts can be easily rinsed with water until clean. Gel that remains
on the skin or in the patient's hair can be removed with water or
by combing the hair after drying.
Package
size and prices
OneStep AbrasivPlus® is produced according to pharmaceutical
GMP conditions. It is available in packaging sizes of 120 g. The
costs for one package is 7,90 € which corresponds to 0,29 Eurocent
per examination. OneStep AbrasivPlus® has a shelf life of 36
months.
Questions?
Please contact us at the following location:
H + H Medical Devices tel.: +49 (0)2590-913893
Mr. Andreas Hellwig fax: +49 (0)2590-913843
Lütke Feld 9 e-mail: info@onestep-eeg-gel.com
D-48249 Dülmen web: www.onestep-eeg-gel.com
Introduction
OneStep Cleargel is a conductive gel which improves test results.
Due to a new composition compared to other conductive Gels OneStep Cleargel offers a unique texture for best conductivity. OneStep
Cleargel is well suited for use with EEG caps, surface cup electrodes
and ECG and EMG electrode applications.
Features
Because OneStep Cleargel contains neither fat nor alcohol or colourings
it is easy to remove by rinsing and friendly to skin. Additionally
it has a neutral odour for greater acceptance by users and patients.
In contrast to alcohol-containing or liquid EEG preparations,
a good constant conductivity is achieved. Because it is a viscous
gel, OneStep Cleargel can be selectively applied to any skin
surface and still provide optimal results. Due to these excellent
physical properties, OneStep Cleargel is applicable for routine
EEGs, long time EEGs, evoked potentials and nerve stimulations.
Application
OneStep Cleargel is a ready to use gel which is applied into the
electrodes with help of a blunted needle and syringe. With other
types of electrodes (ECG, EMG) apply where the electrodes will
be placed. To reduce impedance a skin preparation is recommended.
When the EEG is complete, the electrodes can be easily rinsed
with water until clean. Gel that remains in the patient’s
hair can be removed with water or by combing the hair after drying.
Package
size and prices
OneStep Cleargel Gel is produced according to pharmaceutical GMP
conditions. It is available in packaging sizes of 500 g, 1000 g
and 4000 g and has a shelf life of 36 months.
Questions?
Please contact us at the following location:
H + H Medical Devices tel.: +49 (0)251-1442820
Mr. Andreas Hellwig fax: +49 (0)251-2395755
Rudolf-Diesel-Straße 63 e-mail: info@onestep-eeg-gel.com
D-48157 Münster web: www.onestep-eeg-gel.com
|
